China Steel Wheel Sliding Gate Pulley for Automatic Sliding Gates with Best Sales

Solution Description

Solitary Bearing Trapezoid Gate Wheel

Model A B C D E Bodyweight
(Y)
Models:g
Bodyweight
(U)
Units:g
Weight
(V)
Units:g
30×11 35 11 30 forty five 17 * * sixty three
40×14 45 fourteen 38 seventy five twenty five 192 185 194
50×15 fifty five 15 forty eight 75 25 253 244 263
50×15 sixty 15 48 eighty five 30 303 292 302
60×17 65 twenty fifty eight eighty five thirty four hundred 395 410
70×20 eighty 20 sixty eight one hundred 35 640 640 665
80×20 eighty five 20 48 one hundred 35 805 785 825
90×20 100 20 88 133 35 1130 1121 1145
100×20 one zero five twenty ninety eight 133 35 1350 1338 1363
The info is calculated by hand, maybe there are some problems, just for reference.

Double Bearing Gate Wheel

Design A B C D E Bodyweight(Y) Bodyweight(U)
50MM 55 26 48 eighty five 30 324 320
60MM 65 30 58 85 30 617 580
70MM 80 32 68 a hundred 35 977 954
80MM 85 32 48 100 35 1260 1223
90MM 100 32 88 133 35 1788 1760
100MM one zero five 32 98 133 35 2100 2078
The data is measured by hand, possibly there are some errors, just for reference.

Laminated Gate Wheel

Product A B C D Fat(Y/V) Bodyweight(U)
50mm forty eight 15 100 26 260 250
60mm 58 17 100 26 390 360
70mm 68 20 136 33 590 570
80mm 78 twenty 136 33 750 725
90mm 88 20 152 33 1060 1030
100mm ninety eight twenty 152 33 1265 1225
The knowledge is calculated by hand, possibly there are some mistakes, just for reference.

Hang Gate Wheel

 Model A B C D E F G H I
H25 fifty one 25 M9*50 9 95 seventy nine 25 six 27
H38 86 38 M12*70 11 one hundred twenty 118 38 ten 32
H55 one hundred fifteen fifty five M20*85 fourteen 140 159 44 ten fifteen
The knowledge is measured by hand, probably there are some glitches, just for reference.

Triangle Gate Wheels/ Rotation Gate Wheels/ Hanging Wheels/ White Zinc Gate Wheels/ Doule Wheels Double Bearing Gate Wheel

      We have presently experienced nealy a 10 years producting and exporting knowledge. Because 2014, we have marketed our products to dozens of international locations all around the planet. And we have established a deep cooperative partnership with a lot of clients. 
      We make our goods with heart, attempt to provide the greatest good quality for customers. So we obtained a lot of consumer approval. After that, we will also strictly management, down-to-earth, and forge in advance.

        1.ZheJiang Joinwin Components and Equipment Co., Ltd. we have ten many years producing and exporting experience which ranks amid the very best in China. Largely revenue pliers, spanners, scissors, saws, screwdrivers, wheels, sillicone sealant, tapline and other hand equipment. 
        2.Positioned in HangZhou in which is just 180km considerably from HangZhou Port and many uncooked material factories all around, significantly lowers transportation and procurement expenses.
        3.We have professional sales and engineers to supply pleased services to clientele. Our organization handles an region of one thousand sq. meters, has the most advanced creation gear and technologies.      
        4.Customer very first, crew perform, embrace alter, honest are our organization society.      
        5.We goal to offer clients far more basic safety and hassle-free life.

              Pliers                 Adjustable Wrench  Blend Spanners         Hammers               Pruner Scissors        Aviation Tin Snips
      Screwdrivers                    Padlocks                   Hand Saws                       Axe                 Silicone Sealant 
Q1: Can I get a sample?
A1: Of course, the samples are generally cost-free for consumers.

Q2: Can you provide OEM provider?
A2: Of course, we can generate the merchandise in accordance to clients’ requires.

Q3: How can you ensure the quality?
A3: We have advanced gear and professional engineer and high quality inspector to guarantee the top quality of the products. And we will deliver further items for insurance policy. Besides, we have content following-support.

This autumn: What is the MOQ?
A4: 500 PCS.

Q5: How prolonged you will complete my order?
A5: Completely in thirty times. (The distinct situation depends on the creation routine of the generation office.)

US $0.3-1.2
/ Piece
|
500 Pieces

(Min. Order)

###

Certification: CE
Splittable: Splittable
Surface Treatment: Zinc Plated
Material: Metal
Color: Customized
Logo: Customized

###

Samples:
US$ 0.01/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model A B C D E Weight
(Y)
Units:g
Weight
(U)
Units:g
Weight
(V)
Units:g
30×11 35 11 30 45 17 * * 63
40×14 45 14 38 75 25 192 185 194
50×15 55 15 48 75 25 253 244 263
50×15 60 15 48 85 30 303 292 302
60×17 65 20 58 85 30 400 395 410
70×20 80 20 68 100 35 640 640 665
80×20 85 20 48 100 35 805 785 825
90×20 100 20 88 133 35 1130 1121 1145
100×20 105 20 98 133 35 1350 1338 1363
The data is measured by hand, maybe there are some errors, just for reference.

###

Model A B C D E Weight(Y) Weight(U)
50MM 55 26 48 85 30 324 320
60MM 65 30 58 85 30 617 580
70MM 80 32 68 100 35 977 954
80MM 85 32 48 100 35 1260 1223
90MM 100 32 88 133 35 1788 1760
100MM 105 32 98 133 35 2100 2078
The data is measured by hand, maybe there are some errors, just for reference.

###

Model A B C D Weight(Y/V) Weight(U)
50mm 48 15 100 26 260 250
60mm 58 17 100 26 390 360
70mm 68 20 136 33 590 570
80mm 78 20 136 33 750 725
90mm 88 20 152 33 1060 1030
100mm 98 20 152 33 1265 1225
The data is measured by hand, maybe there are some errors, just for reference.

###

 Model A B C D E F G H I
H25 51 25 M9*50 9 95 79 25 6 27
H38 86 38 M12*70 11 120 118 38 10 32
H55 115 55 M20*85 14 140 159 44 10 15
The data is measured by hand, maybe there are some errors, just for reference.
US $0.3-1.2
/ Piece
|
500 Pieces

(Min. Order)

###

Certification: CE
Splittable: Splittable
Surface Treatment: Zinc Plated
Material: Metal
Color: Customized
Logo: Customized

###

Samples:
US$ 0.01/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model A B C D E Weight
(Y)
Units:g
Weight
(U)
Units:g
Weight
(V)
Units:g
30×11 35 11 30 45 17 * * 63
40×14 45 14 38 75 25 192 185 194
50×15 55 15 48 75 25 253 244 263
50×15 60 15 48 85 30 303 292 302
60×17 65 20 58 85 30 400 395 410
70×20 80 20 68 100 35 640 640 665
80×20 85 20 48 100 35 805 785 825
90×20 100 20 88 133 35 1130 1121 1145
100×20 105 20 98 133 35 1350 1338 1363
The data is measured by hand, maybe there are some errors, just for reference.

###

Model A B C D E Weight(Y) Weight(U)
50MM 55 26 48 85 30 324 320
60MM 65 30 58 85 30 617 580
70MM 80 32 68 100 35 977 954
80MM 85 32 48 100 35 1260 1223
90MM 100 32 88 133 35 1788 1760
100MM 105 32 98 133 35 2100 2078
The data is measured by hand, maybe there are some errors, just for reference.

###

Model A B C D Weight(Y/V) Weight(U)
50mm 48 15 100 26 260 250
60mm 58 17 100 26 390 360
70mm 68 20 136 33 590 570
80mm 78 20 136 33 750 725
90mm 88 20 152 33 1060 1030
100mm 98 20 152 33 1265 1225
The data is measured by hand, maybe there are some errors, just for reference.

###

 Model A B C D E F G H I
H25 51 25 M9*50 9 95 79 25 6 27
H38 86 38 M12*70 11 120 118 38 10 32
H55 115 55 M20*85 14 140 159 44 10 15
The data is measured by hand, maybe there are some errors, just for reference.

Types of pulleys and their advantages and disadvantages

There are several types of pulleys. Learn the basic equations of the pulley system. Then learn about the different uses for pulleys. The disadvantages of using pulleys will be covered. Knowing these, you can buy the pulley that suits your needs. Here are some of the best pulley types and their pros and cons.
pulley

Basic equations of pulley systems

A pulley system is a mechanism that allows two blocks of a certain mass to be connected by a taut rope. The acceleration of each block is the same in magnitude and direction. The external force acting on each block is the weight of the block (10g) and the tension in the string. The tension between the two blocks is the total tension and the force acting on the pulley is the weight of the two blocks.
This simple mechanism uses two simple equations to explain how the system works. First, the mass of the weight on both sides of the pulley must be the same. When the weight is forced to move, the rope tightens and the second pulley descends. The weight is also attached to the second pulley and must be the same distance as the first pulley. This will result in a speed ratio of 2 times the distance covered by the first pulley.
Second, we have to calculate the force required to lift the object. The lower mass is supported by a wire configuration passing through all pulleys, while the uppermost pulley is used to apply the force. The lower block is used to support the weight. The applied force needs to travel a distance nx to move the weight. This distance, called MA, can be written as:
Once we have gathered the necessary information, we can apply the calculations to the pulley system. We can also use the Mechanical Advantage Calculator to calculate the force on the anchor. To do this, we must apply a force to the load as well as to the pulley itself. Using this equation, we can calculate the force required by the load to lift the load.
pulley

Types of pulleys

There are three basic types of pulleys: movable, fixed and compound. Both types of pulleys translate the force applied to them. The ideal mechanical advantage of pulleys is two. This is because a single movable pulley only doubles the force, whereas a compound pulley doubles or triples the force. This type of pulley is often used with other types of pulleys.
Movable pulls move with the weight of the load, and the force pulling them increases on the lift side. They are often found in utility elevators and construction cranes. These systems are very simple, inexpensive and quiet to use. The force required to lift the object depends on the mechanical advantage of the system. The two most common types of pulleys are listed below. Let’s take a closer look at each one.
V-shaped pulleys are used in vehicles and electric motors. These pulleys require a “V” belt to function properly. Some have multiple “V” grooves to avoid slipping. They are used in heavy duty applications to reduce the risk of power slip. These pulleys also have more than one “V” groove. V-belt pulleys are commonly used in vehicles and electric motors.
Composite pulleys are made from more than one type of cable or rope wrapped around the wheel. They can be fixed or hinged and are usually made of stainless steel or bronze. Composite pulleys have multiple layers and can be a single unit or many different components. There are three main types of pulleys: fixed pulleys and composite pulleys. These are the most common types. Almost every type of pulley is used for some type of application.
Fixed pulleys have one advantage over movable pulleys: they change direction as the weight of the load increases. They are typically used in heavy construction equipment. Gun tackles, patio tackles, and stationary tackles are examples of equipment that use a pulley mechanism. These devices are very common and can be found on most modern construction sites. They provide great convenience for lifting large loads.

application

What are the applications of pulleys? Simply put, a pulley is a mechanical device that transforms a difficult task into an easier one. It consists of ropes and pulleys. It is usually used to lift objects. Usually, people wrap a rope around a pulley and pull up to lift the object. One disadvantage of using pulleys is that they require the same force as lifting the object directly.
One of the most popular applications of pulleys is lifting heavy objects. They help people pull up heavy objects and blocks. The system can also be used in seeders, lifts, grinders, etc. Other applications include raising flags, loading cargo, pulling curtains and rock or mountain climbing. Students can learn about the various uses of pulleys and the physics behind them.
Pulleys can be made of many different materials, depending on the application. Some are movable, which means they move with the object they are used to lift. This pulley system can be made of nylon, wire rope or fiber material. The best part about these systems is that they are easy to install and maintain. For a better grasp, use the guide or video tutorial to learn more about the pulley system and how it works.
Tapered pulleys are common in paper mills. They are high-quality pulleys that transmit power to connected parts. They can be dynamic or static and have different balances. Because pulley systems are highly customized, most industrial applications require systems designed specifically for specific applications. In this way, the system is safe, simple and inexpensive. The benefits of this design are endless.
The most common use of pulleys is for motor drives. They are used to minimize noise by applying force to the shaft to reduce the workload. They are also less expensive than gears and do not require lubrication. Furthermore, they can change the direction of the applied force. They are also less expensive than gears and are often used with other components. A screw is a cylindrical member with helical ribs used to connect something.
pulley

shortcoming

Although the pulley system makes it easier to move heavy objects, it still has some drawbacks. When using a pulley system, you must remember that the force required to lift the weight increases with the number of cycles. In addition, the distance between the puller and the heavy object increases, which may lead to accidents. Also, moving heavy objects can be tricky if the rope slips. Pulley systems are not very expensive and can be easily assembled. However, it does require a lot of space.
First, it is not efficient. Besides being inefficient, pulleys produce different forces at different speeds. Fixed pulleys use more force than the load, while movable pulleys move with the load. A movable pulley requires less force than a fixed pulley, but the combined system travels a long distance. Therefore, this method is not as efficient as the fixed method.
Pulleys are not only used in industrial processes. You can see them in various places in your daily life. For example, large construction cranes use pulleys to lift heavy loads. Even flagpoles, blinds, clotheslines, ziplines, motors and climbing equipment use pulleys. Still, despite their advantages, the disadvantages are not too serious.
Another disadvantage of the pulley is its wear and tear. While a pulley’s housing is theoretically infinite, its bearings and locking components typically wear out over time. To overcome this problem, a new bearing and locking assembly can be installed. No need to replace the housing and shaft, the entire assembly can be re-bonded and painted to replicate the original look. Alternatively, the pulley can be replaced with a new housing and shaft.
Using pulleys can also reduce the advantage of pulleys. On the other hand, interception and tackle is a system in which two pulleys are connected to each other using ropes. Unlike pulleys, pulley pulley systems can be adjusted in the direction of travel and can move heavy loads up to four times their force when used in hydraulic lifts.

China Steel Wheel Sliding Gate Pulley for Automatic Sliding Gates     with Best Sales China Steel Wheel Sliding Gate Pulley for Automatic Sliding Gates     with Best Sales
editor by czh 2022-12-24

flat pulley

As one of leading flat pulley manufacturers, suppliers and exporters of mechanical products, We offer flat pulley and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of flat pulley

Recent Posts